Standing seam · Corrugated · Metal slate
Metal roofing Cedar Park homeowners are weighing comes down to three panel types and one real decision: whether the fasteners show. We install standing seam, corrugated and metal slate on homes, shops and commercial buildings, and repair metal roofs that are already up. Every project starts with a free inspection and a written photo report inside 24 hours.
They are not interchangeable. Each suits a different building, budget and neighbourhood, and the right one is usually obvious once you know what separates them.
Flat panels joined by raised vertical seams, with the fasteners hidden underneath. Nothing penetrates the panel face, which makes it the cleanest look and the most watertight of the three.
Full detail on our Standing seam metal roofing Cedar Park page.
Ribbed panels screwed through the face into the structure below. Lower cost and quick to install, with a trade-off in long-term maintenance covered in the table below.
Formed metal that reads as slate or shingle from the street, with the weight and durability of metal. Often the easiest metal roof to take to an HOA architectural committee.
Want steel that looks like shingle, shake or tile? Stone-coated steel, formerly sold as Boral Steel, is covered on Boral steel roofing Cedar Park TX.
Once you have settled on metal, this is the choice that decides how much the roof asks of you later. On an exposed fastener roof, every screw is a potential leak point sealed by a rubber washer, and those washers age in the Texas sun while the panels expand and contract through every hot day and cool night.
| Standing seam | Exposed fastener | |
|---|---|---|
| Fasteners | Hidden under the seam | Driven through the panel face |
| Leak points | Seams and flashing details | Every screw, plus seams and flashing |
| Maintenance | Low; inspect seams and flashing | Periodic re-tightening and washer replacement across the roof |
| Thermal movement | Clips let panels move | Movement works on the screws over time |
| Upfront cost | Higher | Lower |
| Look | Clean, continuous lines | Ribbed, agricultural or industrial |
| Best fit | Homes and long-term roofs | Barns, shops, workshops and outbuildings |
Exposed fastener is not the wrong product. On a workshop where a drip is an inconvenience rather than a ruined ceiling, it is often the sensible call. On a house you plan to stay in, standing seam usually earns its premium. Within standing seam there is a second choice, snap-lock or mechanical seam, which is decided mainly by roof pitch and is covered on the standing seam page.
Central Texas is hard on roofing: long, hot summers, spring hail across Williamson County, and wind that finds every loose edge. Metal handles all three better than most materials, with some honest caveats.
Reflective finishes shed more of the summer sun than dark shingles. Attic ventilation still matters, so we check it on every metal job rather than assuming the panels do all the work.
Metal resists impacts better than most roofing, and many panels carry a UL 2218 Class 4 rating. Confirm the rating on the spec sheet for the exact product you are quoted.
A well-installed metal roof commonly outlasts asphalt by decades. For many owners it is the last roof they buy for that house, which is where the upfront premium pays back.
Many Texas homeowner policies carry a cosmetic damage exclusion for metal roofs. Dents that do not affect the roof's ability to shed water are not paid, so a claim can be denied on the exclusion even when the hail marks are obvious. Separately, some carriers discount premiums for Class 4 roofs.
Both usually sit in the same policy, so ask your carrier about the exclusion and the discount in the same call, before you choose a panel. How claims work in practice is covered in our Cedar Park roof damage insurance claim guide. Coverage decisions are always between you and your carrier.
Look along a flat metal panel in low sun and you may see a slight waviness. That is oil canning. It is inherent to formed metal, it does not affect watertightness, and manufacturers generally do not warrant against it. Panel profile, gauge and striated or ribbed pans make it less noticeable, and we talk through those options before you order. A contractor who promises a flat-pan roof will never show it is setting you up for disappointment.
Many Cedar Park HOAs allow metal, particularly metal slate and muted standing seam colours, but approval is the committee's decision, not ours. The order matters because metal panels are made to order for your roof. Submit, get written approval, then order. Doing it the other way round can leave you holding custom material the HOA will not accept. We bring colour samples and the product details architectural committees ask for, so the submission goes in complete the first time.
Metal costs more upfront than asphalt. For comparison, a full asphalt replacement on a typical Cedar Park home runs $8,500 to $16,000, and our Cedar Park roof replacement page explains what that covers. We price metal from the inspection rather than publishing a range, because the variables move the number too far for a range to be honest: panel type and gauge, roof pitch, the number of valleys and penetrations, whether the old roof comes off, and what the decking looks like underneath.
Still deciding between materials? Asphalt roofing Cedar Park TX weighs asphalt against metal and the other options, and our Asphalt shingle roofing Cedar Park TX page covers the shingle work in detail. A re-roof is the one moment when changing material costs no extra labour.
Roof, decking signs and attic ventilation, with a written photo report inside 24 hours.
Type, profile and finish chosen for the pitch, the building and your plans for it.
Line-item scope, then HOA approval where needed, before anything is ordered.
Panels made to order and installed to the manufacturer's specification.
Seams, flashing and trim checked with you, and the site cleaned.
Backed-out screws, perished washers, lifted seams and flashing that has pulled away are the usual suspects on an older metal roof, and most of them are repairs rather than replacements. Our Metal roof repair page covers them. After hail or wind, start with Roof damage repair Cedar Park TX; if water is coming in right now, go to Emergency roof repair Cedar Park TX.
Metal is common on warehouses, churches, retail and agricultural buildings, often alongside low-slope membrane sections that need different treatment. Our Commercial roofing Cedar Park TX page covers commercial systems and the recoat-or-replace decision. Metal is also the usual answer for shops and outbuildings on acreage, covered on Liberty Hill roofing, and for lake homes that take wind off the water, covered on Jonestown roofing.
More than asphalt upfront. For comparison, a full asphalt shingle replacement on a typical Cedar Park home runs $8,500 to $16,000. Metal is priced from the inspection, because panel type, pitch, roof complexity, tear-off and decking condition all move the number too far for an honest range.
A well-installed metal roof commonly outlasts asphalt shingles by decades, and many homeowners who choose metal expect it to be the last roof they buy for that house. Lifespan depends on the panel, the finish and above all the installation details at seams, fasteners and flashing.
For a home, usually standing seam, because its fasteners are hidden under the seam and nothing penetrates the panel face. Corrugated and other exposed fastener panels cost less but rely on screws and washers that need periodic re-tightening or replacement, which makes them the right answer for barns, shops and workshops.
Metal resists hail better than most roofing, and many panels carry a UL 2218 Class 4 impact rating, which you can confirm on the product spec sheet. Two insurance points matter: some carriers discount Class 4 roofs, and many Texas policies exclude cosmetic damage on metal, so ask your carrier about both in the same call.
Many do, particularly metal slate and muted standing seam colours, but approval is the HOA's decision. Because panels are made to order, get written approval before anything is ordered. We bring samples and the product details your architectural committee will ask for.
That is oil canning, a visible waviness in flat metal panels. It is inherent to formed metal, it is not a defect, it does not affect watertightness, and manufacturers generally do not warrant against it. Panel profile, gauge and striations reduce how noticeable it is.
Book a free inspection and you will have a written photo report inside 24 hours, with the panel options that suit your roof, your HOA and how long you plan to stay. Ask us anything along the way.
Cedar Park Roofing Pros · 13406 Anderson Mill Rd, Cedar Park, TX 78613 · (512) 651-3216 · thecedarparkroofingcompany@gmail.com
A Cedar Park metal roofer works with panels, fasteners and seams instead of shingles and nails, and most metal roof problems trace back to those three things. We repair, replace and install metal roofing in Cedar Park TX on homes, shops, barns and small commercial buildings, and we inspect every metal roof the same way: fasteners and seams first, then flashing, then the panels themselves.
Rusted or worn-out metal roofs, and shingle-to-metal conversions.
Concealed-fastener and exposed-fastener systems for new builds and additions.
Hidden fasteners, raised seams and the details that decide how long it lasts.
Most metal roof repair Cedar Park TX homeowners call us about isn't about the panels. Metal panels last a very long time. The parts that fail are the small ones: the rubber washers under exposed fasteners, the sealant at panel laps, and the flashing where the roof meets something else. Those fail first because they bear the most movement from heat and sun.
| What you see | Usual cause | The repair |
|---|---|---|
| Drips along a screw line | Washers cracked by sun, or screws backed out as panels expand and contract | Replace failed fasteners with new gasketed screws, sized up where the hole has widened |
| Leak at a panel overlap | Sealant at side or end laps has dried and split | Clean the lap, re-seal with compatible sealant, and re-fasten if the lap has opened |
| Leak at a wall, chimney or skylight | Flashing pulled loose or sealed with the wrong material | New metal flashing and counterflashing cut to the panel profile |
| Wind-driven rain at the ridge | Missing or crushed foam closures under the ridge cap | Replace closures and re-secure the ridge cap |
| Rust spots or streaks | Scratched coating, cut edges, or steel shavings left from a past job | Clean, treat and coat the area; replace the panel if rust has gone through |
| Dents after hail | Impact damage, which may or may not affect water-shedding | Document it first, then repair or replace panels where function is affected |
For hail and wind damage and the insurance side of it, see Roof damage repair Cedar Park TX. Dents on metal raise policy questions that shingles don't, and the standing seam page explains how many Texas policies handle them.
Metal roof replacement Cedar Park TX homeowners ask about usually means one of two jobs: replacing an old metal roof that's rusted or worn out, or converting a shingle roof to metal. They need different scopes, and a good estimate says which one you're getting.
Every slope, the decking from the attic, and each flashing point. Metal panels are cut to length, so measurements have to be exact.
Panel system, gauge, color, underlayment, trim and flashing, with decking repair as its own line.
Panels and trim are often made to order, so lead time is part of the schedule.
Old roofing off, decking repaired, underlayment on, so the house is protected before panels go up.
Panels, ridge, closures and flashing, then a walk-through with photos and the warranty paperwork.
If you're still deciding between metal and another material, our Asphalt roofing Cedar Park TX guide compares the options.
A metal roof Cedar Park TX homeowners choose costs more than shingles up front and lasts much longer. Whether that trade is worth it depends mostly on how long you plan to stay. Here's how the metal roofing Cedar Park TX homeowners choose compares on the things they ask about most.
| Question | The honest answer |
|---|---|
| Heat | Light-colored metal reflects much of the summer sun, and a vented installation helps the attic stay cooler. Color and attic ventilation matter more than metal versus shingle alone. |
| Hail | Metal won't crack or lose granules, and many metal systems carry a Class 4 impact rating. It can still dent, and how dents are treated depends on your policy. |
| Noise | Over solid decking and underlayment, rain on a metal roof sounds much like rain on shingles. The loud tin-roof sound comes from panels over open framing, like a barn. |
| Lifespan | Measured in decades, typically well beyond a shingle roof, as long as fasteners, seams and flashing are maintained. |
| Cost | More than asphalt shingle up front. The trade pays back best if you'll be in the house for many years. |
| Weight | Lighter than shingles, so it rarely needs any structural changes. |
Yes. Most metal roof repair in Cedar Park is on roofs someone else installed. We inspect the whole roof first, because a leak at one screw line usually means others are close behind.
On exposed-fastener roofs, the rubber washers wear out well before the panels do. Plan on checking fasteners every few years and replacing failed ones as a group rather than one at a time.
Sometimes, but we usually recommend a tear-off. It lets us check and repair the decking and avoids trapping a worn-out roof underneath the new one.
Some Texas carriers discount impact-rated roofs, but it varies by carrier and policy. Ask your carrier and get the answer in writing before choosing a roof on that basis.
Decades, typically well beyond a shingle roof. What decides it is maintenance of the small parts: fasteners and washers on exposed-fastener roofs, and sealant, closures and flashing on every metal roof.
Yes. Exposed-fastener metal is often the right, economical choice for shops, barns and outbuildings, and we'll recommend it there rather than a more expensive system.
Tell us what you're seeing, or what you're considering. We'll inspect the roof for free and give you a written photo report within 24 hours. Metal and shingle roofing in Cedar Park since 2017.
