Repair
Seams, penetrations, wall transitions, drains and storm damage, fixed at the source with photo documentation.
Flat · Low-slope · Metal · Multifamily
Commercial roofing Cedar Park TX property owners can plan around starts with knowing what is actually under the membrane. We repair, restore and replace flat, low-slope and metal roofs on offices, retail, warehouses, churches and light industrial buildings, with written scopes and photo documentation owners and managers can act on. Commercial roofing Cedar Park owners deal with is mostly low-slope work, where a small failure hides well and gets expensive underneath. Every job starts with a free inspection and a written photo report inside 24 hours.
On a flat roof, the expensive part is usually the insulation, not the membrane. A leak that runs for months saturates the insulation board underneath, and wet insulation has to come out. That is why the first question on any commercial roof is how much of it is still dry, and why we answer it before recommending repair, restoration or replacement.
Four jobs make up most of our commercial work. Each depends on what the inspection finds, so the inspection comes first.
Seams, penetrations, wall transitions, drains and storm damage, fixed at the source with photo documentation.
A coating over a membrane that is still sound, with dry insulation underneath. Only where the substrate genuinely supports it.
Tear-off or re-cover, phased around your operations, with the wet insulation found and removed.
Condition report with photos and priorities, for budgeting, a purchase or after a storm.
Standing seam and panel systems for pitched commercial roofs, shops and warehouses.
Apartment, condo and townhome communities, graded building by building.
Shingles are not rated below roughly 2:12, so flat and low-slope commercial roofs need a membrane. The right one depends on how the building is used, how much foot traffic the roof sees and what lands on it.
| System | What it is | Where it fits | What to check |
|---|---|---|---|
| TPO | White single-ply membrane with heat-welded seams | Offices and retail where reflecting summer heat matters | Seam welds and the membrane's thickness on the spec sheet |
| PVC | Single-ply membrane with heat-welded seams and strong chemical resistance | Restaurants and buildings venting grease, oils or chemicals | Whether rooftop exhaust contacts the membrane |
| EPDM | Rubber membrane, usually adhered or ballasted | Warehouses and retrofits where the building moves | Seam tape and flashing details, which fail before the rubber |
| Modified bitumen | Multi-ply asphalt-based system | Roofs with heavy foot traffic and mechanical equipment | Blistering and the condition of the cap sheet |
| Metal | Standing seam or exposed fastener panels | Pitched commercial roofs, shops and warehouses | Fastener condition and seam details |
Metal on commercial buildings is covered in more detail on Metal roofing Cedar Park. For smaller low-slope sections such as covered entries, porches and additions, see Flat roof installation Cedar Park TX, and roofs for new buildings and additions are covered on Roof installation Cedar Park.
Commercial roof repair in Cedar Park TX is mostly a question of where to look. The open field of a membrane rarely fails first. The details do, and we check them in this order:
HVAC curbs, pipes, conduits and anything else cut through the roof.
Parapet walls, expansion joints and where the roof meets another surface.
Welded, taped or lapped joints, which separate with age and movement.
Drains, scuppers and gutters. Water still standing 48 hours after rain is ponding.
Punctures from foot traffic, dropped tools and storm debris.
If the membrane is sound and the insulation beneath it is dry, repair it, and a restoration coating may add years at a fraction of replacement cost. If the insulation is saturated across large areas, coating over it traps the water and repairs stop paying for themselves. The deciding fact is how much insulation is wet, and that is established by testing, not by looking. We will only recommend a coating where the roof underneath genuinely supports one.
A commercial roof replacement in Cedar Park is rarely done with the building empty. The job is planned around the business inside it:
Work runs section by section, and each section is left watertight at the end of the day. Nobody should come in to a wet floor because a crew ran out of daylight.
Noisy tear-off, adhesives with an odour and crane lifts are scheduled around your hours and your tenants, agreed before work starts.
HVAC units and other equipment have to be disconnected, raised or reset. We coordinate that with your mechanical contractor rather than leaving it to chance.
A re-cover over an existing roof can save cost when the insulation is dry, but building codes limit how many roof layers a building can carry and a re-cover buries any wet insulation. Tear-off shows what is underneath. Re-roofing a house rather than a commercial building is covered on Cedar Park roof replacement.
Ask every bidder about the warranty. Commercial system warranties are issued by the membrane manufacturer and generally require an installer certified for that specific system. Ask each bidder which system they are certified for and what the warranty covers: material only, or labour and material together. How we write our own scopes is on our Roofing contractor Cedar Park TX page.
Multifamily roofs mix pitched shingle roofs with low-slope breezeways, stair landings and entry canopies, and they answer to three audiences at once: owners, managers and boards. Capital planning is covered on Cedar Park multifamily roof replacement, and the day-to-day triage on Cedar Park multifamily roof repair. The pitched shingle roofs on those buildings are traced and fixed the same way as a house, described on Cedar Park roof repair.
Hail damage on a membrane is often invisible from the ground and sometimes from the roof itself, until water finds the bruise. After a significant storm, get the roof inspected and documented before the next rain. Our Roof damage repair Cedar Park TX page covers storm damage, and the claim side is in the Cedar Park roof damage insurance claim guide.
What we do: photograph the damage, write a scope and meet the adjuster on site. What we do not do: negotiate the claim. Coverage decisions are between the owner and the carrier.
Low-slope roofs hide small failures well. Twice a year, spring and autumn, plus after any significant storm, is common practice, and it is how a separated seam stays a repair instead of becoming wet insulation. Our inspection report ranks what it finds by priority, so it doubles as a budgeting document. Book one through Roof inspection Cedar Park TX.
Roof, details and drainage, with a written photo report inside 24 hours.
Repair, restore or replace, with the evidence behind it.
Line-item, with system, phasing, schedule and warranty spelled out.
Phased around operations, watertight at the end of each day.
Walkthrough, photo documentation and warranty paperwork.
Commercial work is priced from the inspection. System, roof size, the number of rooftop units and penetrations, access, and above all how much of the insulation under the membrane is wet move the number too far for a published range to be honest. You get a written line-item scope before anything is scheduled.
Often. Most commercial roof repair Cedar Park TX owners need targets seams, penetrations, wall transitions and drains, where most low-slope leaks start. If the membrane is sound and the insulation underneath is dry, a repair or a restoration coating can extend its life. If the insulation is saturated across large areas, repairs stop paying for themselves.
In most cases, yes. A commercial roof replacement Cedar Park businesses schedule is usually phased section by section, with the roof kept watertight at the end of each day and noisy or odorous work scheduled around your operations. Rooftop equipment disconnects are coordinated with your mechanical contractor.
It depends on the building. White single-ply membranes such as TPO reflect summer heat; PVC resists grease and chemicals, which suits restaurants; EPDM tolerates movement well; modified bitumen suits roofs with heavy foot traffic; and metal suits pitched commercial roofs. The right answer comes from the building's use, slope, traffic and budget.
We document storm damage, write a scope and can meet the adjuster on site. We do not negotiate claims: coverage decisions are between the owner and the carrier.
Twice a year is common practice, in spring and autumn, plus after any significant hail or wind event. Low-slope roofs hide small failures well, and a seam caught early is a repair rather than wet insulation.
Book a commercial inspection and you will have a written photo report inside 24 hours, with priorities you can budget against. Commercial work runs across the same towns as residential, from the offices and retail covered on Round Rock roofing to the lakeside businesses on Lago Vista roofing. Every service we offer is on our Cedar Park roofing contractor page, the towns we cover are on Cedar Park roofing service areas, and the homepage has more about a Cedar Park roofing company with a local office.
Cedar Park Roofing Pros · 13406 Anderson Mill Rd, Cedar Park, TX 78613 · (512) 651-3216 · thecedarparkroofingcompany@gmail.com
Serving 500+ Austin businesses with zero-compromise quality and unmatched local expertise.
Texas RCTL #12345 certified with $2M liability coverage. Every project is fully insured, protecting your property and giving you complete peace of mind throughout the process.
We have earned the trust of Cedar Park businesses through consistent quality and reliable service. From suburban office parks to industrial facilities, we understand the roofing needs specific to Cedar Park properties.
Certified installer for GAF, Firestone, and Carlisle—the industry's top manufacturers. We never cut corners on materials, ensuring your roof performs for decades with full manufacturer warranties.
OSHA-compliant operations with zero accidents in 2024. Our crew follows rigorous safety protocols on every job site, protecting both our team and your property from start to finish.
Deep expertise in Central Texas climate challenges—from scorching 100°F summers to sudden hailstorms and high winds common near the Hill Country. We know Cedar Park roofing inside and out, including all local building codes.
Storm damage or sudden leak? We're on-site within 2 hours, any time of day or night. Our local Cedar Park team is always ready to protect your business from further damage.
As Cedar Park’s premier commercial roofing contractor, we proudly serve businesses throughout the Cedar Park area and surrounding communities. Our local presence means faster response times, intimate knowledge of regional building codes, and a deep understanding of Cedar Park weather challenges—from intense summer heat and Hill Country winds to sudden hailstorms. When you need roofing contractors in Cedar Park TX, we’re your neighbors first.need roofing contractors in Austin TX, we’re your neighbors first.
Residential & commercial (Our Main Location)
Downtown, North, South, East & West
Full metro coverage
Industrial & retail
Lakeside commercial
Retail & office parks
Delivering excellence across Austin’s commercial landscape—from office towers to industrial warehouses.

Full insurance claim handled, all tenants remained open, and the repaired section now exceeds original specifications.
Hail storm caused extensive damage to a 28,000 sq ft retail plaza. Our emergency team mobilized within 2 hours, provided temporary weatherproofing, and completed full section replacement in 72 hours.
Full insurance claim handled, all tenants remained open, and the repaired section now exceeds original specifications.
A 150,000 sq ft standing seam metal roof installation for a major logistics warehouse. The project replaced a deteriorated built-up roof system with a modern, energy-efficient metal solution.
Cooling costs reduced by 18%, zero maintenance required in first 2 years, and a 50-year manufacturer warranty secured.
Don’t wait for a small leak to become a costly disaster. Our certified inspectors will assess your commercial roof’s condition, identify potential issues, and provide a detailed report with transparent pricing—completely free. Most inspections completed within 48 hours across Austin, Round Rock, Cedar Park, and Pflugerville.
Commercial roofing costs in Austin typically range from $4–$12 per square foot, depending on several factors: roof size, material choice (TPO, EPDM, PVC, metal), existing roof condition, and accessibility. For example, a 10,000 sq ft TPO roof replacement averages $50,000–$70,000. We provide detailed, transparent quotes after a free inspection. Most projects qualify for financing options, and we work directly with insurance companies for storm damage claims. Energy-efficient roofing systems may also qualify for tax incentives, potentially offsetting 10–15% of costs.
Timeline varies by project scope. A typical 20,000 sq ft flat roof replacement takes 5–10 business days with a crew of 4–6 professionals. Factors affecting duration include weather conditions (we don't work in rain or extreme heat), roof complexity, material delivery, and whether we're working around your business operations. We create detailed schedules to minimize disruption—many clients prefer night or weekend work, which we accommodate. Emergency repairs are completed within 24–48 hours. We'll provide a specific timeline during your free consultation.
Austin's intense UV exposure, temperature extremes (100°F+ summers), and occasional hail require durable materials. We recommend: TPO (Thermoplastic Polyolefin) for most flat roofs—heat-reflective white surface reduces cooling costs by 15–20%, excellent hail resistance, 20-year warranties. Standing Seam Metal for longevity—50+ year lifespan, superior wind resistance, low maintenance. PVC Membrane for chemical exposure areas such as restaurants and manufacturing facilities. All materials we install meet Texas building codes and carry manufacturer certifications. We'll recommend the best option based on your building type, budget, and long-term goals.
Yes, comprehensive coverage. Workmanship Warranty: 5–10 years on all labor, covering installation defects. Material Warranty: 15–30 years manufacturer warranties on materials (varies by product). System Warranties: Available on complete roof systems—up to 20 years covering both materials and labor when using certified systems. We're authorized installers for GAF, Firestone, and Carlisle, allowing us to offer their premium warranties. All warranties are transferable if you sell your property, adding value. We also offer optional extended maintenance plans that preserve warranty coverage and extend roof life.
Absolutely—it's one of our specialties. After severe weather, we provide: Free Storm Damage Inspection within 24 hours to document all damage with photos and detailed reports. Insurance Documentation including scope of work, material specifications, and cost estimates in formats adjusters require. Adjuster Meetings where we walk your adjuster through damage, advocating for full coverage. Claims Assistance helping you understand your policy, deductibles, and coverage limits. We work with all major insurance companies and understand their processes. Our goal is maximizing your claim while ensuring quality repairs. We can also provide temporary emergency repairs to prevent further damage while claims are processed.
© 2026 Austin Commercial Roofing. All rights reserved.